An end cap is a rack or counter at the end of a store aisle used to display promotional or sale items.
CPVC pipes excel in hot and cold potable water transportation. With high-temperature resistance and excellent corrosion resistance, they ensure durability and maintain water quality. The low thermal conductivity minimises heat loss, promoting energy efficiency
A Tee is a pipe fitting which is shaped like a "T" and has two outlets at 90 to the single inlet connection. Tees are generally used to combine or split a fluid flow. Straight Tees have inlets and outlets of the same size.
It is used to connect male threaded adapters in different piping systems installed in different industrial and domestic sectors. This adapter is made up of supreme quality polypropylene or High Density Polyethylene material to ensure its strong structure and leak proof nature.
In piping and plumbing, a coupling (or coupler) is a very short length of pipe or tube, with a socket at one or both ends that allows two pipes or tubes to be joined, welded (steel), brazed or soldered (copper, brass etc.) together.
A brass MTA CPVC fitting! The MTA (Micro-Tubing Association) is a standard for specifying tubing and fittings for use in analytical instruments and other applications. Brass is a popular material for MTA fittings due to its resistance to corrosion and durability.
These pipes and fittings are used for the variety of applications like agriculture, irrigation, water supply, industrial process lines, swimming pools and firefighting mains etc.
A reducer is a component in a piping system that changes the pipe size from a larger to a smaller bore. A reducer allows for a change in pipe size to meet flow requirements or to adapt to existing piping. The length of the reduction is usually equal to the average of the larger and smaller pipe diameters.
brass FTA CPVC fitting" refers to a type of connector used in piping systems to join plastic and metal pipes together. FTA stands for "threaded for adapter," which indicates that the fitting is designed to be attached to a CPVC (chlorinated polyvinyl chloride) pipe using a brass adapter.
This CPVC fitting is used to connect two pipes of varying diameters. The reducer coupler regulates the flow of water in the plumbing system.
This adapter is widely used in various plumbing and piping systems for the commercial and domestic sector. It is suitable to be used for both hot and cold water applications. Offered Male Thread Adapter (M.T.A) is available at reasonable prices and wide range of specifications to our trusted customers
The step-over bend is one of few pipe fittings that provides an innovative solution for making arrears in existing vertical pipes. The unique fitting can be attached to in-built sockets of existing pipes without dislocating the water-flow in a running pipe.
The Brass Elbow MABT is a variation of the typical elbow joint with a protruding brass threaded exterior. This part is screwed into a female ended part of fitting or equipment to divert the flow of water in a certain direction at a 90-degree angle in the plumbing system.
This CPVC fitting regulates the flow of hot and cold water across vertical intersections across the plumbing system. The cross tee can be used across a variety of pipes of different diameters and pressure bearing capacities.
A ball valve is a form of quarter-turn valve that uses a pivoting ball that has been drilled through to control flow. When the hole is in line with the flow direction, it allows fluids or gasses to pass through. Alternatively, when the ball is turned 90 degrees, the flow is stopped completely.
elbow fittings, are used to connect pipes at a 45-degree angle. These fittings are commonly used in plumbing systems to transition between different pipe sizes, change direction, o
90 elbows are used to connect two pipes that are at a right angle to one another. On a level installation, they serve as corner or railing ends. In other words, A 90-degree elbow is easily connected to pipes made of so many different materials, including rubber, steel, cast iron, copper, and plastic
It is widely used in village building, agricultural drainage and irrigation and other construction, industry and agriculture.
The brass tee MABT can be fitted along various diameters across different pressure outlets in the plumbing system. A tee is specifically useful in changing the direction of water flow with minimum to negligible structural changes in the overall piping system.
A union is a threaded fitting which allows the pipe work to be separated and reconnected without any horizontal movement in the pipe. It can be a standalone pipe fitting connecting two pieces of pipe, or an integral part of another fitting (such as a ball valve) which allows it to be separated.
The CPVC Reducer Bush is a valuable addition to any plumbing system as it allows for the connection of pipes with different diameters, while ensuring a secure and leak-free joint. This can be especially useful when upgrading or modifying existing plumbing systems.
This CPVC fitting is a unique fitting that can be connected to a pipe directly without requiring the need for an additional fitting. This contraption can be screwed in directly to a tank facilitating seamless water-flow from the tank with minimum upkeep & maintenance.
A threaded elbow is a specific type of CPVC fitting that allows for 90-degree changes in the direction of water flow while providing a secure, threaded connection.
Using an end plug, also known as a thread sealant, is a crucial step in ensuring a watertight seal for your pipes. An end plug is typically used to seal the end of a pipe, preventing leaks and preventing contamination.
Did not receive yet?
Thank You!
Thank You for your valuable time. We have received your details and will get back to you shortly.
Inquiry Sent
For immediate response, call this customer.